35W Jube chassis only

CDN$ pricing!  35W Jube (based on the Silver Jubilee).  The orginal M circuit is a good one but kludgy.  I cleaned it up a hair and absolutely improved it.  The LED clipping system remains exactly as the original as does the unique 3rd stage feedback loop.  Chassis only, no tubes no head cab. Depth does to the low end what presence does to the highs. 

More details


Availability: This product is no longer in stock

One of the changes I did was to re-balance the 3rd and 4th stages.  Back off gain1 which lowers the LED clipping, and turn up gain2 and you are into a GREAT version of an old school hot rodded Marshall tone. 

Custom, superior sounding 12AT7 phase inverter.

Has an effects loop, and excellent one I have been using for years based on the Naylor SD60

6L6's are run very gently and should last for 5 YEARS MINIMUM!

Main signal that is mostly point to point, and components are really in the best possible position. 

Amp will be burned in/tested for 48 hours then shipped.

2 x 6L6 and 3 x 12AX7 and a 12AT7 needed.

If you need a head cab and tubes and want this plug'n'play, email me at  If you want different knobs, that can be done.

There is a jack on the rear to check the bias current if you want to be sure.  You just need a voltmeter.  Small pot inside to change it, but don't get too hung up about idle bias.

Buy it, you won't regret it.

Custom faceplate colours available, and if you want a custom name for it - I CAN DO THAT

Never had an issue shipping to the US

I deal with sourmashguitarcabs all the time, check with Bob for a nice head cab unless you want to build your own.

email me direct at with any questions, the messaging on my site here is flaky.



No products

Shipping $0.00
Total $0.00

Cart Check out